Technical Bearing Guide
How to Read a Bearing Number: A Practical Guide to Bearing Codes

Learn how bearing numbers identify bearing type, series, bore size and additional design features using practical examples including 6205, 6308, NU205, 22212 and 30205.

A bearing number is not just a part number. In many standard rolling bearings, the designation contains useful information about the bearing family, dimensional series, bore size and additional design features.

Numbers such as 6205, 6308, NU205, 22212 and 30205 may look like random combinations of letters and digits, but they follow established bearing designation principles.

Understanding these numbers can help purchasing teams, maintenance departments, workshops and industrial buyers identify bearings more accurately and reduce the risk of ordering the wrong specification.

Important: Bearing designation systems are not completely identical across every manufacturer or bearing type. The basic designation follows widely used industry principles, while supplementary codes can vary by manufacturer. Always verify critical specifications against the relevant manufacturer’s technical catalogue.
Series Identifies the bearing family and dimension series.
Bore Code Helps identify the nominal shaft/bore diameter.
Suffix Adds information such as seals, clearance or mounting features.

Quick Example: What Does 6205 Mean?

Take one of the most common bearing numbers:

6205

62 — Bearing series
05 — Bore code

For many standard metric bearings, bore code 05 means:

05 × 5 = 25 mm

Therefore, a standard 6205 bearing normally has a 25 mm bore.

However, this is only the basic designation. A complete bearing number may look like:

6205 2RS C3

6205 — Basic bearing designation
2RS — Sealing specification
C3 — Internal-clearance specification

This is why buyers should provide the complete bearing number, rather than only the basic number.

The Basic Structure of a Bearing Designation

A rolling-bearing designation can generally contain:

Prefix  →  Basic Bearing Designation  →  Supplementary Codes / Suffixes

The basic designation normally identifies the bearing type or series and its principal dimensions.

  • Internal design
  • Seals or shields
  • Internal clearance
  • Cage design
  • Accuracy or tolerance class
  • Tapered bore
  • Snap-ring arrangement
  • Lubrication or special treatment

The exact supplementary codes can vary between manufacturers.

Understanding the Bearing Series

The digits before the bore code help identify the bearing family and dimension series.

Example Series Common Bearing Family
60, 62, 63 Deep groove ball bearings
70, 72, 73 Angular contact ball bearings
NU2, NU3 Cylindrical roller bearings
222, 223 Spherical roller bearings
302, 322 Tapered roller bearings
511, 512 Thrust ball bearings

The series matters because two bearings can have the same bore diameter but completely different outside diameters, widths, internal geometry and operating characteristics.

For example:

6205    6305    NU205    30205

These can all commonly have a 25 mm bore, but they are not the same bearing.

Same bore does not mean same bearing. The complete designation should always be considered.

How to Read the Bearing Bore Code

For many standard metric rolling bearings, the final two digits of the basic designation represent the bore code.

Bore Code Nominal Bore Diameter
0010 mm
0112 mm
0215 mm
0317 mm
0420 mm
0525 mm
0630 mm
0735 mm
0840 mm
1050 mm
1260 mm
20100 mm

For many standard bearings from bore code 04 onward:

Bore Code × 5 = Nominal Bore Diameter in Millimetres

05

05 × 5 = 25 mm

08

08 × 5 = 40 mm

12

12 × 5 = 60 mm

20

20 × 5 = 100 mm

Special Bore Codes: 00, 01, 02 and 03

The first four standard bore codes are exceptions to the multiply-by-five rule.

Bearing Example Bore Code Nominal Bore
62000010 mm
62010112 mm
62020215 mm
62030317 mm
62040420 mm

Example 1: How to Read 6205

6205

Bearing family: Deep groove ball bearing
Series: 62
Bore code: 05
Nominal bore: 25 mm

If the designation is 6205 2RS C3, the basic bearing remains 6205, while 2RS and C3 provide additional specification information.

The suffixes should not be ignored because a standard 6205, 6205 ZZ, 6205 2RS and 6205 C3 are not automatically equivalent for every application.

Example 2: What Does 6308 Mean?

6308

Bearing family: Deep groove ball bearing
Series: 63
Bore code: 08

08 × 5 = 40 mm

Therefore, a standard 6308 normally has a 40 mm nominal bore.

A 6208 and a 6308 can both have a 40 mm bore, but they belong to different dimension series.

  • Outside diameter
  • Width
  • Load capacity
  • Weight
  • Application suitability

This is why selecting a bearing only by bore size is not sufficient.

Example 3: What Does 22212 Mean?

22212

Bearing family: Spherical roller bearing
Bore code: 12

12 × 5 = 60 mm

Therefore, a standard 22212 normally has a 60 mm nominal bore.

A complete designation may appear as:

22212 K C3

Additional codes such as K and C3 identify further bearing characteristics. A buyer should therefore quote the complete designation rather than simply requesting “22212”.

Example 4: What Does NU205 Mean?

Letters can form an important part of the basic bearing designation.

NU205

NU: Cylindrical roller bearing design
Bore code: 05
Nominal bore: 25 mm

However:

NU205    NJ205    NUP205

should not automatically be treated as the same item.

The letters identify different cylindrical roller bearing configurations and can affect the arrangement of flanges and the way axial displacement or axial load is accommodated.

Always match the complete designation.

Example 5: What Does 30205 Mean?

30205

Bearing family: Tapered roller bearing
Bore code: 05
Nominal bore: 25 mm

This does not make it interchangeable with a 6205 or NU205 simply because the bore diameter is also 25 mm.

Each belongs to a different bearing family designed for different load and operating characteristics.

Important Exceptions to the ×5 Rule

The multiply-by-five rule is useful, but it is not universal.

Bearings Below 10 mm Bore

For certain small bearings, the actual bore size may be represented directly in the designation.

Intermediate Bore Sizes

Some bearings have bore dimensions that are not represented by the normal ×5 code.

/22    /28    /32

For example, 63/22 indicates a bearing with a 22 mm bore.

Large Bore Bearings

For larger bearings, the actual bore diameter may also appear after a slash.

618/500 = 500 mm nominal bore
The ×5 rule should therefore not be applied blindly to every bearing designation.

What Do Letters Before the Numbers Mean?

Letters before or within the basic designation can identify the bearing design.

NU    NJ    NUP    NNU    NA

These codes form part of the technical specification.

Different cylindrical roller bearing prefixes, for example, can indicate different flange arrangements and axial-locating capabilities.

If an existing bearing is marked NUP205, replacing it with NU205 simply because the dimensions appear similar may not be correct.

What Do Letters After the Bearing Number Mean?

Suffix Common Meaning
C3 Internal clearance greater than Normal
C4 Internal clearance greater than C3
Z Shield on one side
ZZ / 2Z Shields on both sides
2RS Seals on both sides
N Snap-ring groove
NR Snap-ring groove with snap ring
K Tapered bore in many designation systems
P5 / P6 Accuracy / tolerance-related designation

Suffix terminology varies by manufacturer and bearing series.

SKF, JTEKT/KOYO, NSK, NTN, NACHI, FAG and other manufacturers can use different supplementary codes for similar design features.

The safest approach is to compare the technical meaning of the suffix, rather than simply matching the letters.

Can Different Brands Use Different Codes for Similar Bearings?

Yes. The basic designation of many standardized bearings can be similar across manufacturers, but additional codes can differ.

  • Seals
  • Shields
  • Cage material
  • Internal design
  • Lubrication
  • Tolerance
  • Heat treatment
  • Internal clearance

Cross-brand substitution should therefore be based on the complete technical specification, not only a matching basic bearing number.

How to Identify a Bearing When the Number Is Partially Missing

If the bearing marking is damaged or unreadable, start with three basic dimensions.

d Bore / inside diameter
D Outside diameter
B Bearing width

These measurements can help narrow down possible bearing numbers.

However, dimensions alone may not identify:

  • Internal clearance
  • Seal or shield type
  • Cage design
  • Precision class
  • Special internal design
  • Manufacturer-specific modifications

Whenever possible, also provide clear photographs of the bearing and its markings.

How to Send a Better Bearing Enquiry

Instead of sending:

Need bearing 6205

provide the complete information where available:

6205 2RS C3

Brand: KOYO
Quantity: 20 pcs
Application: Electric motor
  • Preferred manufacturer
  • Existing bearing brand
  • Complete bearing marking
  • Required quantity
  • Application or machine type
  • Bearing photographs
  • Bore, outside diameter and width if the number is unclear
  • Whether an alternative brand is acceptable

Providing complete information helps reduce unnecessary clarification and improves quotation accuracy.

Common Mistakes When Reading Bearing Numbers

Looking Only at the Bore Code

Two bearings can have the same bore but belong to completely different bearing families.

Ignoring Letters

NU205 and NUP205 should not automatically be treated as identical.

Ignoring Suffixes

6205, 6205 C3, 6205 ZZ and 6205 2RS can represent different specifications.

Assuming Every Brand Uses the Same Codes

Supplementary designation systems can differ between manufacturers.

Frequently Asked Questions

What does 6205 mean?

6205 is a common deep groove ball bearing designation. It belongs to the 62 series and bore code 05 normally corresponds to a 25 mm nominal bore.

What size is a 6205 bearing bore?

The bore code is 05. 05 × 5 = 25 mm. Therefore, a standard 6205 normally has a 25 mm bore.

What does 6308 mean?

6308 is a deep groove ball bearing designation from the 63 series. Bore code 08 normally represents a 40 mm nominal bore.

What does 00 mean in a bearing number?

Bore code 00 commonly represents a 10 mm nominal bore. The other special codes are 01 = 12 mm, 02 = 15 mm and 03 = 17 mm.

Does every bearing number use the ×5 rule?

No. The rule applies to many standard metric rolling bearings within applicable size ranges, but important exceptions include small bores, 00–03 codes, intermediate bore sizes and large-bore designations.

Can I identify a bearing only by its bore size?

No. Bearings with the same bore can belong to completely different bearing families and dimension series.

Are bearing numbers the same across all manufacturers?

Basic standardized designations are often similar, but supplementary codes can vary between manufacturers. Always verify the complete designation.

Can I replace one brand with another if the basic number is the same?

Not automatically. The dimensions may match while sealing, clearance, cage, internal design or other specifications differ. The complete technical specification should be compared.

Need Help Identifying a Bearing?

SMS Bearings FZCO supplies genuine industrial and automotive bearings, bearing housings and related solutions from Dubai, UAE to customers across the UAE and international markets.

If you are unsure about a bearing number, send us the complete bearing designation, preferred brand, required quantity, photographs, available dimensions and application details.

Our team can assist with product identification, stock availability and quotation requirements.

Request a Quote

Technical Note: Bearing designation systems vary by manufacturer, bearing type, size and special design. This guide explains commonly used designation principles and should not replace the relevant manufacturer’s official technical catalogue or application-specific engineering requirements.